CNC Wire Saw Machine GBSJ-1500/1800/2000

1. The movements of the machine are controlled by a Four axes CNC. Up -down movement is the Y axis.trolley movement is X axis.left guide wheel rotation is A xis. right guide wheel rotation is B axis.The data can be input directly in the CNC  When you cut standard slabs or by operator program with G code. If you need to produce complex products, you can draw graphics using AutoCAD in DXF format and place them on a USB stick. The CNC machine system can read DXF format and generate the program automatically.  
2.The machine adopts stable structure, including top beam, two vertical columns, rectangular box, hydraulic take-up block, two large flywheels. On the left side is a large drive flywheel and hydraulic tensioner. The hydraulic tensioner controls the tension of the diamond wire or loosens it while maintaining the tension of the diamond wire. The right side controls the flywheel and the main motor, the driven flywheel is controlled by the main motor. The linear speed of the diamond wire ranges from 0-40m / s and is controlled by an inverter. The machine can cut various types of granite and marble
3.To reduce the wear of the diamond wire and maintain the stability of the diamond wire, the machine is equipped with four guide wheels (diameter: 200mm). the guide wheels are protected by rubber (polyurethane) rollers, which can be easily replaced after wear. The guide wheel rotates according to the cutting shape, driven by a stepper motor.                          
4.According to the size of the stone,we equip with an electric system for bringing closer the  guide wheels that is to adjust the cutting width as stone size, reducing the arch value when cutting with diamond wire .                          
5.The table of trolley is 1360 x 2000 mm and has a maximum capacity of 20 Ton. it cannot rotate
6. The working table is driven by a lead screw and moves along metal rails. The lead screw is impregnated with oil and closed with a dust and water cover (patented technology) which prolongs the life of the screw
7. The machine has an automatic alarm that is triggered when the diamond wire breaks.
8.We have equipped the diamond wire cooling system. It monitors the water pressure inside the machine and automatically stops the machine if there is no water in it or insufficient water flow. This is to protect the diamond wire.
9.The UP / DOWN machine screws are covered with a short plastic tube to keep the lubricant inside and lubricate system. Protected by a dust cover from dust and water.