Our stone machines working in more than 60 countries

This machine GBHW-400L 5axis CNC Bridge Saw Machine, This machine is 5axis bridge saw, adopts famous chinese brand servo motors in 5 axis, cutter head can rotate horizontal 360degree, tilting 90degree, touch screen . you can make drawing or make program, It can do normal tiles cutting, but also can cut special different shape slab. And main motor is special high speed one so it can install milling blade to do engraving function, specially used for processing counter top products/tombstone processing/ special shape stone products processing. Multi function.1.Machine is with camera ,also can connect WIFI to get internet to connect with machine and our engineer mobile, to check machine and operate machine here in China to give you help. 2.Saw Blade Straight cutting : It can be as one standard bridge saw to cut slab into tiles;Saw Blade Curve cutting: in control panel there is page to circle/elliptical/horse belly shape/sector shape processing set, you need not make drawing, you just need set some data in the control panel, then it will cut the shape;  3. Milling Blade Cutting:You need operate machine A axis to -90degree, Main motor is high speed one, so it can install this milling blade to process, the software will be similar as standard engraving machine, for engraving words, face, engraving, you need make a drawing in computer

This machine is bridge type, the huge bridge is made of cost iron with high rigidity and super weight. so during long time use it will not bend，vibrate or give way by the cutting pressure, ensures the blade cutting accuracy. Granite slab produced by this machine accurate cutting has a smooth surface, therefore reduce polishing cost.Cutting blade lifting/lowering system is powered by two hydraulic cylinders and guided by four round steel columns. The advantage of hydraulic cylinder powder is to realize fast blade lifting when a cutting is finished.Side beam: two sides beam are fixed screw and nut system to drive the bridge move. Bridge driving motor is installed in the middle back of the stone bridge cutting machine. It transfers force to two screw and nut systems by a long horizontal bar and two pairs of bevel gears. Bevel gears drive two screw and nut systems same time and same speed, this ensures bridge two ends move in same speed. Meanwhile we have specail design for fixing the bridge on the side beams.Control system: Main cabinets adopts Panasonic PLC and touch screen to control the whole processing, beam moving / cutter head up and down/ cutter head moving right and left are all calcualted by encoder, to ensure high precsion and display on the screen, you can check the cutting position easy. High automatic lever. Also cutter head moving speed and bridge moving speed can be adjustable by inverter.It is ideal equipment for cutting dimensional granite block into slabs. Dimensional stone block is cut directly on the ground instead of on a trolley. It not only increases stone block stability during cutting process, but also greatly reduces whole machine maintenance cost. It can be used single blade/multi blades to improve the cutting efficiency. Get high production capcaity and high precision. can install single blade to cut thick slab, or install Max.9pcs blade to cut slabs.

This machine is new designed, steel beam, light body with 4 axis CNC control system, servo motors and drivers With touch screen, and can use U disc to load CAD file to the control panel to cut. Cutter head can rotate 0-360degree horizontal, tilt 0-45degree, all by servo motors, very suitable for small stone processing workshop in city, need small space and easy to transportation.It can install saw blade to cut to cut straigt line, specail shape line, circle line, curve line. It is simple and light type bridge saw which better to install blade under D.400mm, and if yo uneed bigger blade, we need add inverter for main motor. very suitable for processing thin slab that under 50mm thickness, and processing differents countertops, table tops and ect.This machine GBHW-4axis CNC Bridge Saw Machine, is new designed, steel beam, light body with 4 axis CNC control system, servo motors and drivers With touch screen, and can use U disc to load CAD file to the control panel to cut. Cutter head can rotate 0-360degree horizontal, tilt 0-45degree, all by servo motors, very suitable for small stone processing workshop in city, need small space and easy to transportation.It is one of the best bridge saw machine, stone cutting machine, CNC processing machine, CNC stone cutting machine, CNC slab cutting machine. it can install saw blade to cut to cut straigt line, specail shape line, circle line, curve line. It is simple and light type bridge saw which better to install blade under D.400mm, and if yo uneed bigger blade, we need add inverter for main motor. very suitable for processing thin slab that under 50mm thickness, and processing differents countertops, table tops and ect.

GBYH-1315/1325 CNC engraving machine.After careful tests, the product is proven to be good in various aspects, such as performance, durability, usability, and so on.